0.5mm Lead Sheet SK 125 One - Sided Self - Adhesive Lead Sheet
Product description
All SK 125 Lead Sheets are provided with a radiation resistant
adhesive layer.Sk lead can be applied directly on plaster
boards,walls,smooth metal and plastic surfaces etc.The surface is
tin-coated,therefore,people are not exposed to contact with
lead,even during installation.The lead thickness is depending on
shielding regulations and health physics.The surfaces can directly
be painted or covered with wallpaper.It can be easily used in
layers to increase the shielding surfaces.
Sk lead plate can be directly pasted and applied to gypsum board,
wall, smooth metal and plastic surfaces due to its own
radiation-resistant adhesive layer (passing the strict radiation
dose test of 100kgy (10mrad)). In the installation process, the
human body can't touch the lead at all, so the whole process is
safe and carefree, which truly embodies people-oriented.
| 1 | 2 | 3 | 4 |
| Radiation shield made of lead | Corrosion resistant tin coating | Self adhesive coating | Adhesive protective film |
| product mix |
| glue | The crosslinked acrylic adhesive has high contact adhesion and
excellent shear strength at high temperature. The glue layer is
covered with impregnated foil. |
| thickness | glue 0.090mm Covering foil 0.075mm Total 0.165mm |
| Contact adhesion | 1,700N/M |
| Shear strength | FINAT TMB Stainless steel | >400hours At 23 degrees Celsius |
| Peel adhesion(180 ˚ C) | FINAT TM1 On stainless steel | 24 hours later 28N/25mm |
| Thermal performance | Minimum application temperature Temperature range - long term
Temperature range - short term | 18 ˚ C -40˚ C-150 ˚ C Highest 190 ˚ C |
| Minimum contact force on a solid surface | >1N/25mm2 |
| Lead Sheet | base material | 99.5% lead minimum |
| Composite size | Width standard | 1,000mm |
| Composite size | Length standard | 10,000mm(0.5mm Thickness) 5,000mm(1.0mm Thickness) 4,100mm(1.5mm Thickness) 2,500mm(2.0mm Thickness) Other lengths available on request |
| Composite size | Thickness standard | 0.5/1.0/1.5/2.0mm |
| Composite size | Thickness variation | -0/+0.06mm |
| Delivery unit | Coil on cardboard tube | ID76 |
| Other | The values are for reference only, and vary according to the actual
application conditions |
| Remarks | When using the product, make sure that there is no organic solvent
vapor at the work site, and pay attention to prevent contact with
lead comprehensively |
Product advantage
- Quick installation and easy operation
- Green environmental protection, completely tinned surface to
prevent contact with lead during installation
- High material utilization
- Short delivery time
- Suitable for all types of gypsum board
Product application
| Medical care | - Shielded room, wall, door, floor, ceiling or panel wall
- Fixed / movable protective door
- Shielding equipment
- Retrofit / upgrade X-ray rooms to meet more stringent requirements
|
| NDT | X-ray shielding box |
| Personal safety system | - Airport / high speed rail and other luggage scanning
- Luggage scanning in other safe places
|
Company Profile
Chengxin Radiation Protection Co., Ltd., located in Taihu Basin of
the Yangtze River Delta,is a technological innovation enterprise
specializing in R&D,production and engineering application of
radiation protection equipments.The products of the company cover
all kinds of radiation shielding for industrial NDT, security
check,medicine,nulear power, high energy physics and other fields.
We provide all life service from plan design,production
manufacturing to installation, commissioning and maintenance.The
company strictly complies with ISO9001 quality management system
standard and wins the ten best integrity enterprise of “quality
assurance and customer satisfaction”, quality trustworthy product
of Jiangsu Province,3A enterprise of Contract-observing and
Promise-keeping and other honors. The products have been examined
by Protection Quality Monitoring Center of Radiation Protective
Equipment of Ministry of Health.The test report is issued (FJ No.
198). In year 2016,the radiation protection products of the company
passed CE certification.
Packaging logistics
- Packaging Details
- Wooden case or according to user's request.
- Port
- Shanghai, China
FAQ
1. Can you provide samples?
Yes, we can provide samples for inspection.
2. Can you do it according to our own design?
Yes, OEM and ODM orders are acceptable.
3. What is the production lead time?
Many of the available items are in stock and can be shipped within
a week. Inventory is changing every day, please confirm with our
sales.
New products take 15-30 days, the order quantity is different.
4. What is the minimum order quantity?
The minimum order quantity of each product is different. Please
contact us.
5. Why choose us?
We are a factory with core technology of quality control and
competitive price.
